GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1236195  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the splash shield. Refer to Engine Splash Shield Replacement in Body Front End.
  4. Remove the solenoid and bolts.
  5. Discard the O-ring.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1236195  Size: SH
  1. Install the NEW O-ring (415), solenoid (416) and bolts (417).
  2. Tighten
    Tighten the switch to 12 N·m (106 lb in).

  3. Install the splash shield. Refer to Engine Splash Shield Replacement in Body Front End.
  4. Install the wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.