Removal Procedure
- Loosen clamp at the air cleaner assembly and the front outlet duct seal assembly.
- Remove the attachment bolt from the support bracket.
- Remove the outlet resonator/duct assembly.
Installation Procedure
- Install the outlet resonator/duct assembly into position.
Notice: Refer to Fastener Notice in the Preface section.
- Position the outlet resonator/duct assembly to support bracket and install the bolt.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Tighten the clamps at the air cleaner assembly and the front outlet duct seal assembly.
Tighten
Tighten the clamps to 4 N·m (35 lb in).