Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views DEFINITION: The CTD system will not ARM or DISARM properly. | |||
1 | Did you perform A Diagnostic System Check - Theft Deterrent? | Go to Step 2 | |
2 |
Do the courtesy lamps illuminate? | Go to Step 3 | Go to Courtesy Lamps Inoperative in Lighting Systems |
3 |
Is the theft system LED on steady or flashing? | Go to Step 4 | |
4 |
After 30 seconds, does the theft LED change from OFF to FLASHING? | Go to Step 5 | Go to Power Door Locks Inoperative - All Doors and Switches in Doors |
5 |
Important: Ensure that all the doors are closed. The Content Theft Deterrent System will not arm if all of the doors are not closed. Does the theft LED begin to flash slowly in about 10 seconds? | Go to Step 6 | Go to Courtesy Lamps Always On in Lighting Systems |
6 |
After approximately 10 seconds, do all of the alarm mode functions activate-parking lights flash and horn pulses? | Go to Step 7 | Go to Step 8 |
7 | Disarm the CTD system by using the keyless entry transmitter. Do all of the alarm mode functions stop? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Keyless Entry System Inoperative in Keyless Entry |
8 | Do any of the alarm functions activate? | Go to Step 9 | Go to Courtesy Lamps Inoperative in Lighting Systems |
9 | Do the horns pulse only? | Go to Lights Inoperative in Content Theft Deterrent (CTD) Alarm Mode | Go to Horn Inoperative in Content Theft Deterrent (CTD) Alarm Mode |