Removal Procedure
- Remove the transmission. Refer to
Transmission Replacement
.
- Remove the flywheel bolts (2), and note the position of the flywheel to the crankshaft.
- Remove the flywheel washer (3) and flywheel (1).
Installation Procedure
- Position the flywheel (1) and flywheel washer (3) on the crankshaft as previously noted.
Notice: Refer to Fastener Notice in the Preface section.
- Install the flywheel bolts (2).
- Tighten the flywheel bolts in sequence.
Tighten
Tighten the flywheel bolts in sequence to 74 N·m (54 lb ft) .
- Install the transmission. Refer to
Transmission Replacement
.