Removal Procedure
- Turn OFF the ignition.
- Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
- Remove the EGR valve retaining nuts.
- Remove the EGR valve assembly.
- Remove the gasket.
- Clean the EGR valve mating surface.
Installation Procedure
- Install the EGR valve with a new gasket to the engine.
Notice: Refer to Fastener Notice in the Preface section.
- Install the EGR valve nuts.
Tighten
Tighten the nuts to 22 N·m (16 lb ft).
- Connect the EGR valve electrical connector.