GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2005 🢒 VUE - AWD 🢒 Body 🢒 Exterior Trim 🢒 Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement

Removal Procedure

    Object Number: 932887 Size: SH
  1. Remove the tail lamp housing to body screws.
  2. Carefully slide the tail lamp housing rearward away from vehicle.
  3. Disconnect the tail lamp housing electrical connector.
  4. Remove the tail lamp housing from the vehicle.

    5. Object Number: 1115833 Size: SH
  5. Rotate the tail lamp bulb assembly counterclockwise and remove from the housing.
  6. Pull tail lamp bulb out of the bulb socket.

Installation Procedure

    Object Number: 1115833 Size: SH
  1. Push the new tail lamp bulb into the bulb socket.
  2. Install the tail lamp bulb assembly into the tail lamp housing.
  3. Connect the tail lamp housing electrical connector.

    4. Object Number: 932887 Size: SH
  4. Align the tail lamp housing with the vehicle.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the tail lamp screws to the tail lamp.

    6. Tighten
    Tighten the tail lamp screw to 2.5 N·m (22 lb in).

  6. Close the rear compartment.