- Remove the 4th clutch pressure switch (5)
and the 4th clutch pressure switch seal (4) from the top of the transmission
case (31).
- Remove the 3rd clutch pressure switch (25) and the 3rd clutch pressure
switch seal (26) from the side of the transmission case (31).
- Inspect the fluid pressure switches for damage. Replace the switches if
faulty.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 3rd clutch pressure switch (25) with a new 3rd clutch pressure
switch seal (26) into the transmission case (31).
Tighten
Tighten the pressure switches to 20 N·m
(14 lb ft)
- Install the 4th clutch pressure switch (5) with a new 4th clutch
pressure switch seal (4) into the transmission case (31).
Tighten
Tighten the pressure switches to 20 N·m
(14 lb ft)