GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Important: Do not swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock, "XM Theftlock" will be displayed.

  1. Remove the rear seat. Refer to Rear Seat Replacement.

  2. Object Number: 1338937  Size: SH
  3. Disconnect the electrical connector.
  4. Remove the receiver fasteners.
  5. Remove the receiver from the vehicle.

Installation Procedure


    Object Number: 1338937  Size: SH
  1. Install the receiver to the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the receiver fasteners.
  4. Tighten
    Tighten the fasteners to 3 N·m (26 lb in).

  5. Connect the electrical connector.
  6. Install the rear seat. Refer to Rear Seat Replacement.
  7. Perform the setup procedure for the digital radio receiver. Refer to Control Module References for programming and setup information.