Driver or Passenger Seat Recliner Handle Replacement Non-Fold Flat

1. Remove the seat from the vehicle. Refer to Front Seat Replacement - Bucket .
2. Remove the recliner trim by pulling on the trim.



3. Remove the seat riser trim handle by pulling on the handle.



4. Remove the screw from the outer trim panel.
5. Remove the outer trim panel from the seat cushion.



6. Remove the recliner handle bolt and spring. Remove the recliner handle.

Notice: Refer to Fastener Notice in the Preface section.




1. Position the recliner handle to the adjuster with the fastener and the spring. Secure the handle in place with the recliner handle bolt.

Tighten
Tighten the bolt to 10 N·m (89 lb in).




2. Position the outer trim panel to the seat cushion. Secure the trim panel with the screws.

Tighten
Tighten the screws to 2.5 N·m (22 lb in).




3. Install the recliner handle trim.



4. Install the seat riser handle trim.
5. Install the front seat. Refer to Front Seat Replacement - Bucket .