For 1990-2009 cars only
Removal Procedure
- Remove the rear seat assembly. Refer to Rear Seat Replacement .
- Remove the anchor bolts from the rear seat buckle.
- Turn the seat over.
- Disengage the cushion drawstring retainers from the rear seat cushion frame.
- Disconnect the remaining cushion cover retainers from the rear seat cushion frame.
- Feed the anchor through to the top of the seat cushion.
- Pull the seat cushion cover and pad over the latch locations.
- Remove the seat cushion cover and pad from the frame.
- Remove the seat cushion cover from the pad by carefully disengaging the hook and loop fasteners.
Installation Procedure
- Install the trim cover to the pad. Engage the hook and loop locations by pressing firmly.
- Position the seat cushion cover and pad to the frame.
- Tuck the seat cushion cover into the seat belt buckle opening.
- Insert the anchor plates for the seat belt buckle through the cushion.
- Attach the cushion cover retainers to the seat frame.
- Pull on the drawstring and connect the drawstring retainer to the cushion frame.
- Install the anchor bolts to the rear seat buckle.
- Install the rear seat. Refer to Rear Seat Replacement .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
