Removal Procedure
- Disable the SIR system. Refer to
SIR Disabling and Enabling
in SIR.
- Remove the front floor console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.
- With park brake lever in the released position, using ONLY hand tools, remove
the park brake cable adjusting nut and washer.
- Release the rear park brake cable ends from the cable equalizer on the
front cable.
- Remove the front park brake cable from the park brake lever by pulling
the cable rearward.
Installation Procedure
- Install the front park brake cable to the park brake lever.
- Install the rear cable ends to the cable equalizer.
- Using ONLY hand tools, install the washer and NEW adjusting nut (1)
to the front park brake cable.
- Adjust the park brake cable tension. Refer to
Park Brake Adjustment
.
- Install the front floor console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.
- Enable the SIR system. Refer to
SIR Disabling and Enabling
in SIR.