GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 931367  Size: SH
  1. Remove the front brake rotor. Refer to Brake Rotor Replacement .

  2. Object Number: 926677  Size: SH
  3. Disconnect the wheel speed sensor electrical connector, if equipped.

  4. Object Number: 931451  Size: SH
  5. Remove the wheel speed sensor electrical connector form the connector bracket.

  6. Object Number: 933045  Size: SH
  7. Remove the front wheel drive shaft spindle nut.

  8. Object Number: 933099  Size: SH
  9. Support the wheel drive shaft with heavy mechanic's wire or equivalent.
  10. Remove and discard the wheel bearing/hub mounting bolts.
  11. Remove the wheel bearing/hub assembly from the steering knuckle.

Installation Procedure


    Object Number: 933099  Size: SH
  1. Install the wheel bearing/hub assembly to the steering knuckle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the wheel bearing/hub mounting bolts.
  4. Tighten
    Tighten the bolts to 130 N·m (96 lb ft).


    Object Number: 933045  Size: SH
  5. Install the wheel drive shaft spindle nut.
  6. Tighten
    Tighten the nut to 205 N·m (151 lb ft).


    Object Number: 931451  Size: SH
  7. Install the wheel speed sensor electrical connector to the mounting bracket, if equipped.

  8. Object Number: 926677  Size: SH
  9. Connect the wheel speed sensor electrical connector.

  10. Object Number: 931367  Size: SH
  11. Install the front brake rotor. Refer to Brake Rotor Replacement .