GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove both front tires and wheels. Refer to Tire and Wheel Removal and Installation .

  3. Object Number: 927949  Size: SH
  4. If equipped with AWD, disconnect the stabilizer links from the stabilizer shaft.
  5. If equipped with AWD, swing the stabilizer shaft upwards in order to gain additional clearance.

  6. Object Number: 1239257  Size: SH
  7. Remove the transmission mount-to-bracket through bolt.

  8. Object Number: 1260852  Size: SH
  9. Remove the transmission mount-to-frame bolts.
  10. Remove the transmission mount from the vehicle.

Installation Procedure

  1. Position the transmission mount to the frame.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1260852  Size: SH
  3. Install the transmission mount-to-frame bolts.
  4. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).


    Object Number: 1239257  Size: SH
  5. Install the transmission mount-to-bracket through bolt, while aligning the transmission mount to the bracket.
  6. Tighten
    Tighten the bolt to 110 N·m (81 lb ft).


    Object Number: 927949  Size: SH
  7. If equipped with AWD, lower the stabilizer shaft and connect the stabilizer links .
  8. Tighten
    Tighten the stabilizer link nuts to 65 N·m (48 lb ft).

  9. Install both front tires and wheels. Refer to Tire and Wheel Removal and Installation .
  10. Lower the vehicle.