| • | 1st gear one-way clutch inoperative |
| • | 1st gear worn or damaged |
| • | 1st accumulator inoperative |
| • | Idle gears worn or damaged |
|
| • | Inspect the 1st clutch pressure. |
| • | Inspect the 1st/2nd clutch shaft and the 1st/coast clutch assembly
for wear and damage. |
| • | Inspect the clutch piston and the O-rings. |
| • | Inspect the spring retainer for wear and damage. |
| • | Inspect the clutch backing-plate-to-top-disc
clearance. If the clearance is out of tolerance, inspect the clutch discs
and plates for wear and damage. If the discs and plates are worn or damaged,
replace the discs and plates as a set. If the discs and plates are in satisfactory
condition, adjust the clutch backing plate clearance. |
|
