| • | Shift solenoid valve C inoperative |
| • | 1st clutch, pressure control solenoid inoperative |
| • | 2nd clutch, pressure control solenoid inoperative |
| • | TCC lock-up, pressure control solenoid inoperative |
| • | Shift cable broken or out of adjustment |
| • | Joint in the shift cable and the transmission or the body worn |
| • | Input speed sensor inoperative |
| • | Output shaft speed sensor inoperative |
| • | ATF temperature sensor inoperative |
| • | CPC valve A inoperative |
| • | CPC valve B inoperative |
| • | Foreign material in the spacer plate orifice |
| • | Shift valve C inoperative |
| • | Shift valve E inoperative |
| • | Servo control valve inoperative |
| • | 1st accumulator inoperative |
| • | One-way check ball stuck |
|
| • | Inspect the MIL indicator for loose connectors. |
| • | Inspect the O-ring and the shift solenoid valve for seizure. |
| • | Inspect the valve body gasket of the AT clutch pressure control
solenoid. |
| • | Inspect the ATF feed pipes for wear and damage. |
| • | Inspect the CPC valves if the AT clutch pressure control solenoid
valve is stuck. |
| • | Inspect for a loose shift cable at the shift lever and the transmission
control lever. |
| • | Inspect the 1st clutch pressure. |
| • | Inspect the clutch piston, the clutch piston check valve, and
the O-rings. |
| • | Inspect the clutch piston return spring retainer for wear and
damage. |
| • | Inspect the clutch backing-plate-to-top-disc
clearance. |
| • | If the clearance is out of tolerance, inspect the clutch discs
and plates for wear and damage. |
| • | If the discs and plates are worn or damaged, replace the discs
and plates as a set. If the discs and plates are in satisfactory condition,
adjust the clutch backing plate clearance. |
|
