GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 986926  Size: SH
  1. Remove the nuts from the clutch pedal assembly studs.

  2. Object Number: 925443  Size: SH
  3. First design. Remove the retaining clip in order to disconnect the clutch master cylinder pushrod from the clutch pedal.

  4. Object Number: 925454  Size: SH
  5. Second design. Disconnect the clutch master cylinder pushrod from the clutch pedal.

  6. Object Number: 986941  Size: SH
  7. Remove the clutch position switch from the clutch pedal assembly by sliding upward.

  8. Object Number: 986926  Size: SH
  9. Remove the bolt from the clutch pedal assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 986926  Size: SH
  1. Install the bolt to the clutch pedal assembly.
  2. Tighten
    Tighten the clutch pedal assembly bolt to 10 N·m (89 lb in).


    Object Number: 986941  Size: SH
  3. Install the clutch position switch by sliding downward.

  4. Object Number: 925443  Size: SH
  5. First design. Connect the clutch master cylinder pushrod to the clutch pedal assembly and install the retaining clip.

  6. Object Number: 925454  Size: SH
  7. Second design. Install the clutch master cylinder pushrod to the clutch pedal.

  8. Object Number: 986926  Size: SH
  9. Install the nuts to the clutch pedal assembly studs.
  10. Tighten
    Tighten the clutch pedal assembly nuts to 23 N·m (17 lb ft).