Driver or Passenger Seat Belt Buckle Replacement Quick Connect
Removal Procedure
- Using a small flat-bladed tool, depress the button on the seat buckle quick disconnect while pulling up on the shoulder belt to disengage the shoulder belt
from the front seat.
- Remove the front seat from the vehicle. Refer to
Front Seat Replacement - Bucket
.
- On the driver side, using a 90-degree pair of pliers, pull firmly on the recliner and riser handle cover to remove the handle cover.
- On the passenger side, remove the recliner side cover fastener and remove the cover.
- Remove the side trim fasteners and remove the side trim.
- Remove the fastener and remove the shoulder belt quick disconnect.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
Important: Apply Permatex® 24200 on all restraint fasteners prior to installation.
- Install the shoulder belt quick disconnect.
Tighten
Tighten the fasteners to 50 N·m (37 lb ft).
- Install the side trim with the fasteners.
Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).
- On the passenger side, install the recliner side cover with the fasteners.
Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).
- On the driver side, install the recliner and seat riser covers by firmly pushing on the handle cover.
- Install the front seat to the vehicle. Refer to
Front Seat Replacement - Bucket
.
Important: Verify that the shoulder belt is not twisted.
- Install the shoulder belt into the shoulder belt quick disconnect.
Driver or Passenger Seat Belt Buckle Replacement Side Mount
Removal Procedure
- Remove the front seat belt retractor pretensioner. Refer to
Seat Belt Retractor Pretensioner Replacement - Front.
- Remove the front seat from the vehicle. Refer to
Front Seat Replacement - Bucket .
- Remove the seat belt buckle fastener and remove the seat belt buckle.
- On the driver side, remove the belt buckle wiring clip from the seat adjuster. Remove the seat belt buckle.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
Important: Apply Permatex® 24200 on all restraint fasteners prior to installation.
- Install the seat belt buckle and the fastener to the seat adjuster.
Tighten
Tighten the fasteners to 45 N·m (33 lb ft).
- On the driver side, attach the seat belt wiring clip to the seat adjuster.
- Install the front seat in the vehicle. Refer to
Front Seat Replacement - Bucket.
Important: Verify that the shoulder belt is not twisted.
- Install the front seat belt retractor pretensioner. Refer to
Seat Belt Retractor Pretensioner Replacement - Front.
- Operate the front seat shoulder belt.