GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - AWD 🢒 Engine 🢒 Engine Controls and Fuel - 2.2L (L61) 🢒 Instrument Cluster Replacement

Removal Procedure
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Place the steering column in the lowest position.
  3. Remove the instrument panel (I/P) cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement .

    4. Object Number: 891893 Size: SH
  4. Remove the fasteners from the upper and the lower cluster. Pull rearward to remove the I/P cluster.
  5. Disconnect the I/P cluster harness.

Installation Procedure

    Object Number: 891893 Size: SH
  1. Connect the I/P cluster harness.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the I/P cluster in the I/P housing. Install and tighten the fasteners.

    3. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  3. Install the I/P cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling .
  5. Refer to Control Module References for programming and setup information.