Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Clean away any debris that may be present around the evaporative emission (EVAP) canister vent filter cover.
- Carefully release the canister filter cover rear retaining tabs.
- Carefully release the canister filter cover forward retaining tabs and remove the cover from the EVAP canister.
- Remove the filter from the canister and discard the filter.
- Remove the seal from the filter cover and discard the seal.
- Clean the inside of the EVAP canister filter housing with a clean shop towel.
Installation Procedure
- Install a NEW cover to the canister. Ensure that the seal is properly seated to the cover.
- Install a NEW filter to the canister filter housing.
- Install the filter cover to the EVAP canister.
- Lower the vehicle.