Tools Required

EN 46337 Timing Belt Alignment Kit

1. Remove the powertrain control module (PCM). Refer to Powertrain Control Module Replacement .
2. Remove the timing belt. Refer to Timing Belt Replacement .



3. Use the EN 46337 to retain the camshaft sprocket.
4. Remove the camshaft bolt and sprocket.

Notice: Refer to Fastener Notice in the Preface section.




1. Use the EN 46337 to retain the camshaft sprocket.

Tighten
Tighten the camshaft sprocket bolt to 90 N·m (67 lb ft) .

2. Install and adjust the timing belt. Refer to Timing Belt Replacement .