Tools Required
• | EN 46347 Crankshaft
Front Oil Seal Driver |
Removal Procedure
- Remove the timing belt. Refer to
Timing Belt Replacement
.
- Remove the crankshaft gear. Refer to
Crankshaft Gear Replacement
.
Important: Use caution when drilling the hole so as not to damage the area around and behind
the seal.
- Carefully drill a small, shallow pilot hole into the steel ring of the seal.
- Screw in a self tapping screw.
- Use pliers to pull out the front main oil seal.
- Clean all sealing surfaces.
Installation Procedure
- Coat the lip of the front main oil seal
with a small amount of clean engine oil to aid in the installation.
- Use the EN 46347
and EN 46342
to install the oil seal.
Gently tap and install the new oil seal until the tool bottoms on the oil pump
housing.
- Ensure that the front main oil seal is fully and evenly seated.
- Install the crankshaft gear. Refer to
Crankshaft Gear Replacement
.
- Install the timing belt. Refer to
Timing Belt Replacement
.