For 1990-2009 cars only
- Remove the bearing cap bolts (108, 109).
- Remove the bearing caps (103) and lower bearings (106). Refer to Separating Parts .
- Remove the crankshaft (102), upper bearings (105) and thrust bearings (104).
- Remove the pins (107).
Important: The powertrain control module (PCM)
must perform the idle learn procedure to determine the minimum throttle position and
to establish idle speed when any of the following components are replaced:
• Throttle body • Timing belt • Timing belt drive sprocket
Refer to
Idle Learn
.
• Crankshaft and bearings
