| Table 1: | Exterior Lamps |
| Table 2: | Interior Lamps |
Scan Tool Parameter | Units Displayed | Typical Data Value |
|---|---|---|
Ignition On, Engine Off | ||
Battery 1 | Volts | Battery Voltage |
DRL Relay Command | On/Off | On when requested |
DRL Relay Feedback | High/Low | Low when requested |
Fog Lamp Relay Cmd. | On/Off | On when requested |
Fog Lamp Relay Fdbk. | High/Low | Low when requested |
Fog Lamps Switch | On/Off | On when requested |
High Beam Switch | On/Off | On when requested |
Low Beam Input | Volts | 0.4 volts - Battery Voltage |
Low Beam Input = Off | Yes/No | No when Low Beams requested |
Low Beam Input = DRL | Yes/No | Yes when DRL requested |
Low Beam Input = High | Yes/No | No when Low Beams requested |
Park Lamp Switch | On/Off | On when Park Lamps requested |
Scan Tool Parameter | Units Displayed | Typical Data Value |
|---|---|---|
Ignition On, Engine Off | ||
Dome Lamp Command | On/Off | On when Dome requested |
Dome Lamp Feedback | High/Low | Low when Dome requested |
Driver Door Switch | High/Low | Low with Driver Door Open |
Inadvertent Power Cmd. | On/Off | On |
Inadvertent Power Fdbk. | High/Low | Low |
I/P Dimmer Input | Volts | 0.5-4 volts |
I/P Dimmer Output | % | 20-100% |
Key In Ignition | Yes/No | Yes |
Pass Door Switches | High/Low | Low with any Door Open |
