GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Hood Primary and Secondary Latch Replacement

Removal Procedure

    Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

  1. Open and support the hood.
  2. Mark the hood latch location to the support bracket with a grease pencil.

    3. Object Number: 930866 Size: SH
  3. Remove the hood latch bolts.
  4. Disconnect the release cable from the hood latch.

Installation Procedure

    Object Number: 930866 Size: SH
  1. Install the hood latch release cable to the hood latch.
  2. Position the hood latch to the alignment marks on the support bracket.
  3. Install the hood latch bolts.
  4. Tighten the hood latch bolts.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Slowly close the hood and check latch operation.
  6. Open the hood.

    7. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  7. Close the hood.