GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - AWD 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 930236 Size: SH
  2. Loosen the stabilizer bar clamp bolts.

    3. Object Number: 1830224 Size: SH

    Important: Hold the ball shaft secure with a TORX® bit, when removing the nut.

  3. Remove the stabilizer link to stabilizer bar nut.

    4. Object Number: 1830228 Size: SH

    Important: When disconnecting the stabilizer link, hold the link with a wrench to prevent turning.

  4. Remove the stabilizer link to control arm nut.
  5. Remove the stabilizer link from the vehicle.

Installation Procedure
  1. Position the stabilizer link through the control arm.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1830228 Size: SH

    Important: When connecting the stabilizer link, hold the link with a wrench to prevent turning.

  2. Install the stabilizer link to control arm nut.

    3. Tighten
    Tighten the nut to 15 N·m (11 lb ft).


    Object Number: 1830224 Size: SH

    Important: Hold the ball shaft secure with a TORX® bit, when installing the nut.

  3. Install the stabilizer link to stabilizer bar nut.

    4. Tighten
    Tighten the nut to 47 N·m (35 lb ft).


    Object Number: 930236 Size: SH
  4. Install the stabilizer bar clamp bolts.

    5. Tighten
    Tighten the bolts to 70 N·m (52 lb ft).

  5. Lower the vehicle.