- Loosen the toe link-to-frame fastener enough to allow for movement.
Important: The frame of the vehicle is slotted, a cam nut is available for service if required.
- Rotate the toe link cam nut in the direction necessary to correct the toe angle.
- Snug the toe link-to-frame fastener, do not tighten at this time.
- Reinspect the rear toe specifications and adjust as necessary.
Notice: Refer to Fastener Notice in the Preface section.
- Hold the nut and tighten the link-to-frame fastener bolt.
Tighten
Tighten the bolt to 110 N·m (81 lb ft).
- Repeat the procedure for the other rear wheel.