GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - AWD 🢒 Body Systems 🢒 Lighting 🢒 Rear License Plate Lamp Replacement

Removal Procedure
  1. Remove the liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement .

    2. Object Number: 933002 Size: SH
  2. Disconnect the license lamp electrical connector.
  3. Remove the license lamp bezel to liftgate nuts.
  4. Remove the license bezel housing from the vehicle.

Installation Procedure

    Object Number: 933002 Size: SH
  1. Position the license lamp bezel on the liftgate.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the license lamp bezel to lift gate nuts.

    3. Tighten
    Tighten the nuts to 4 N·m (35 lb in).

  3. Connect the license lamp electrical connector.
  4. Install the liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement .