Removal Procedure
- Place the front door window in the full down position.
- Remove the inner front door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the front door water deflector.
- Lower the window (2) to the center of the inner door panel, align the bolts with the access.
- Remove the window guide bolts (1) from the window regulator.
- Slide the window (2) down and out of the primary glass channels.
- Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.
Installation Procedure
- Install the window (2) by sliding the window into the door through the outside door belt opening.
- Install the window into the primary glass channels and rest the window on the regulator guide plate.
Notice: Refer to Fastener Notice in the Preface section.
- Install the window guide bolts (1) to the regulator.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the front door water deflector.
- Install the front inner door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Inspect the window for proper operation.