| Table 1: | Instrument Panel Cluster (IPC) |
| Table 2: | Engine Control Module |
| Table 3: | Starter/Generator Control Module (SGCM) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, engine OFF, brake fluid level normal, and park brake released | |||
Low Brake Fluid Level | -- | Volts | 2.5 |
Park Brake Switch | Inputs for Analog Dash | Off/On | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, engine On | |||
Brake Booster Pressure Sensor | Hybrid Data | KPa | Varies |
Brake Press. Sen. 2 | Hybrid Data | KPa | Varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, engine OFF, brake fluid level normal, and park brake released | |||
Hill Hold Solenoid 1 | PWM on time | Percentage | 2.5 |
Hill Hold Solenoid 2 | PWM on time | Percentage | 2.5 |
Hill Hold Solenoid Relay | Enable/Disable | Varies | 2.5 |
Hill Hold Solenoid Relay | Enable/Disable | Varies | 2.5 |
Hill Hold Solenoid 1 | Enable/Disable | Varies | 2.5 |
Hill Hold Solenoid 2 | Enable/Disable | Varies | 2.5 |
