GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - AWD 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T45-E 🢒 Transmission Control Replacement

Removal Procedure
  1. If the shift control is being replaced, remove the shift control knob. Refer to Floor Shift Control Knob Replacement . If the shift lever is not being replaced, it is not necessary to remove the shift control knob.
  2. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
  3. Remove the instrument panel storage compartment. Refer to Instrument Panel Storage Compartment Replacement .

    4. Object Number: 1412174 Size: SH
  4. Remove the range select lever cable from the shift control.

    5. Object Number: 1412177 Size: SH
  5. Remove the park lock cable from the shift control. Refer to Park Lock Cable Replacement .

    6. Object Number: 1412179 Size: SH
  6. Disconnect the electrical connector.

    7. Object Number: 1412180 Size: SH
  7. Remove the automatic transmission control nuts.
  8. Remove the automatic transmission control.

Installation Procedure

    Object Number: 1412180 Size: SH
  1. Install the automatic transmission control.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the automatic transmission control nuts.

    3. Tighten
    Tighten the nuts to 25 N·m(18 lb ft).


    Object Number: 1412179 Size: SH
  3. Connect the electrical connector.

    4. Object Number: 1412177 Size: SH
  4. Install the park lock cable to the shift control. Refer to Park Lock Cable Replacement .

    5. Object Number: 1412174 Size: SH
  5. Install the range select lever cable to the automatic transmission control.
  6. Install the instrument panel storage compartment. Refer to Instrument Panel Storage Compartment Replacement .
  7. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
  8. If the shift control knob was previously removed. Refer to Floor Shift Control Knob Replacement .