Tools Required

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the drive axle assembly. Refer to Front Wheel Drive Shaft Replacement .
3. For right side seal, remove exhaust front pipe. Refer to Exhaust Manifold Pipe Replacement .



4. Using J 45000 , remove the wheel drive shaft oil seal from the transmission case.

Important: The seal must install flush with the case flange.

1. Using the J 43068 , install the transmission output shaft oil seal into the transmission case.
2. Install the drive axle assembly. Refer to Front Wheel Drive Shaft Replacement .
3. Lower the vehicle.
4. Check the transaxle fluid level. Refer to Transmission Fluid Check .