GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation .

  2. Object Number: 1874291  Size: SH
  3. Remove the rear cover bolts.
  4. Remove the rear cover.
  5. Inspect the oil guide for damage and replace as necessary.

Installation Procedure


    Object Number: 514887  Size: SH
  1. Install sealant to the rear cover. Refer to Adhesives, Fluids, Lubricants, and Sealers for sealant type.

  2. Object Number: 1874291  Size: SH

    Important: The oil guide only installs in one direction. Ensure the oil guide is completely seated in the gear shafts.

  3. Install the oil guide.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the rear cover.
  6. Tighten
    Tighten the rear cover bolts to 25 N·m (18 lb ft).

  7. Install the left front wheel. Refer to Tire and Wheel Removal and Installation .