Removal Procedure
- Remove the instrument panel upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
.
- Remove the windshield defrost duct nuts from the HVAC module.
- Remove the windshield defrost duct from the HVAC module.
Installation Procedure
- Inspect the windshield defrost duct seals. If damaged, replace using Kent Industries adhesive back foam tape
P/N 46485 or equivalent.
- Install the windshield defrost duct to the HVAC module.
Notice: Refer to Fastener Notice in the Preface section.
- Install the windshield defrost duct nuts to the HVAC module.
Tighten
Tighten the nuts to 2.5 N·m (22 lb in).
- Install the instrument panel upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
.