GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - AWD 🢒 Preface 🢒 Cautions and Notices 🢒 Front Bumper Lower Fascia Replacement

Removal Procedure

    Object Number: 1718782 Size: SH
  1. Remove the four push-pin retainers holding the front lower fascia to the front wheelhouse liners.

    2. Object Number: 1718781 Size: SH
  2. Remove the three push-pin retainers holding the lower fascia to the frame.

    3. Object Number: 1718780 Size: SH
  3. Remove the six retaining nuts holding the lower and upper fascias together.

    4. Object Number: 1718779 Size: SH
  4. Pull the lower fascia forward gently to disengage from upper fascia.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1718779 Size: SH
  1. Push the lower fascia forward into the upper fascia engaging the plastic clips into the holders on the upper fascia.

    2. Object Number: 1718780 Size: SH
  2. Tighten the 6 nuts to re-secure the lower fascia to the upper fascia.

    3. Tighten
    Tighten the nuts to 6 N·m (53 lb in).


    Object Number: 1713458 Size: SH
  3. Install the three push-pin retainers re-securing the lower fascia to the front of the frame.

    4. Object Number: 1713456 Size: SH
  4. Install the four push pin retainers into the front wheelhouse liners.