GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 VUE - AWD 🢒 Engine 🢒 Engine Controls and Fuel - 2.4L 🢒 Transmission Mount Replacement - Left Side

Removal Procedure
  1. Remove the battery tray support bracket if equipped with 2.4L (LAT). Refer to Battery Tray Support Bracket Replacement .
  2. Remove the battery box if equipped with 2.4L (LE5). Refer to Battery Box Replacement .
  3. Install the engine support fixture. Refer to Engine Support Fixture .
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    5. Object Number: 1873814 Size: SH
  5. Remove the front transmission mount thru bolt.

    6. Object Number: 1890284 Size: SH
  6. Remove the rear transmission mount thru bolt (1).
  7. Lower the vehicle.

    8. Object Number: 1873804 Size: SH
  8. Remove the transmission mount to transmission mount spacer bolts (1).
  9. Using the engine support, lower the transmission in order to remove the transmission mount spacer bolts.

    10. Object Number: 1873810 Size: SH
  10. Remove the transmission mount spacer bolts and spacer.

    11. Object Number: 1873808 Size: SH
  11. Remove the transmission mount to frame rail bolts.
  12. Remove the left transmission mount.

Installation Procedure

    Object Number: 1873808 Size: SH
  1. Install the left transmission mount.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the transmission mount to frame rail bolts.

    3. Tighten
    Tighten the bolts to 27 N·m (20 lb ft).


    Object Number: 1873810 Size: SH
  3. Install the transmission mount spacer and bolts.

    4. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  4. Using the engine support, raise the transmission until the transmission mount spacer contacts the left transmission mount.

    5. Object Number: 1873804 Size: SH
  5. Install the transmission mount to transmission mount spacer bolts (1).

    6. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  6. Raise the vehicle.

    7. Object Number: 1890284 Size: SH
  7. Install the rear transmission mount thru bolt (1).

    8. Tighten
    Tighten the bolt to 100 N·m (74 lb ft).


    Object Number: 1873814 Size: SH
  8. Install the front transmission mount thru bolt.

    9. Tighten
    Tighten the bolt to 110 N·m (81 lb ft).

  9. Lower the vehicle.
  10. Remove the engine support fixture. Refer to Engine Support Fixture .
  11. Install the battery box if equipped with 2.4L (LE5). Refer to Battery Box Replacement .
  12. Install the battery tray support bracket if equipped with 2.4L (LAT). Refer to Battery Tray Support Bracket Replacement .