Exhaust Muffler Replacement LAT, LE5

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the catalytic converter to muffler nuts (1).



3. With the aid of an assistant, remove the muffler insulators (1) from the hangers.
4. Remove the muffler assembly.

Important: Replace the muffler hangers any time the exhaust system is removed from the vehicle. Do not use any mineral oil based lubricants or sharp tools when installing new exhaust system hangers.

1. With the aid of an assistant , position the muffler assembly.
2. Install the muffler insulators (1) to the hangers.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the catalytic converter to muffler nuts.

Tighten
Tighten the nuts to 25 N·m (18 lb ft).

Exhaust Muffler Replacement LZ4

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the catalytic converter to muffler nuts (1).



3. With the aid of an assistant, remove the muffler insulators (1) from the hangers.
4. Remove the muffler assembly.

Important: Replace the muffler hangers any time the exhaust system is removed from the vehicle. Do not use any mineral oil based lubricants or sharp tools when installing new exhaust system hangers.

1. With the aid of an assistant , position the muffler assembly.
2. Install the muffler insulators (1) to the hangers.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the catalytic converter to muffler nuts.

Tighten
Tighten the nuts to 25 N·m (18 lb ft).

Exhaust Muffler Replacement LY7

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the catalytic converter to muffler nuts (1).



3. With the aid of an assistant, remove the muffler insulators (1) from the hangers.
4. Remove the muffler assembly.

Important: Replace the muffler hangers any time the exhaust system is removed from the vehicle. Do not use any mineral oil based lubricants or sharp tools when installing new exhaust system hangers.

1. With the aid of an assistant , position the muffler assembly.
2. Install the muffler insulators (1) to the hangers.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the catalytic converter to muffler nuts.

Tighten
Tighten the nuts to 25 N·m (18 lb ft).