GM Service Manual Online
For 1990-2009 cars only

Exhaust Manifold Replacement - Left Side LZ4

Removal Procedure


    Object Number: 1886180  Size: SH
  1. Remove the left side catalytic converter. Refer to Catalytic Converter Replacement - Left Side .
  2. Remove the heated oxygen sensors (HO2S). Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 .
  3. Remove the left side exhaust manifold bolts (1).
  4. Remove the left side exhaust manifold and gasket.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1886180  Size: SH
  1. Install the left side exhaust manifold and a NEW exhaust manifold gasket onto the cylinder.
  2. Install the exhaust manifold bolts.
  3. Tighten
    Tighten the bolts to 20 N·m (15 lb ft).

  4. Install the HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 .
  5. Install the left side catalytic converter. Refer to Catalytic Converter Replacement - Left Side .

Exhaust Manifold Replacement - Left Side LY7

Removal Procedure


    Object Number: 1886180  Size: SH
  1. Remove the left side catalytic converter. Refer to Catalytic Converter Replacement - Left Side .
  2. Remove the heated oxygen sensors (HO2S). Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 .
  3. Remove the oil level indicator and tube. Refer to Oil Level Indicator and Tube Replacement .
  4. Lower vehicle.
  5. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side .
  6. Remove the left side exhaust manifold bolts (1).
  7. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  8. Remove the left side exhaust manifold and gasket.

Installation Procedure


    Object Number: 1886180  Size: SH
  1. Install the left side exhaust manifold and a NEW exhaust manifold gasket onto the cylinder.
  2. Lower the vehicle.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the exhaust manifold bolts.
  5. Tighten
    Tighten the bolts to 20 N·m (15 lb ft).

  6. Install the HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 .
  7. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side .
  8. Install the left side catalytic converter. Refer to Catalytic Converter Replacement - Left Side .
  9. Install the oil level indicator and tube. Refer to Oil Level Indicator and Tube Replacement .