Camshaft Cover Replacement LAT

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
2. Disconnect the engine wiring harness electrical connectors (2, 3) from the intake and exhaust camshaft position actuator solenoid valves.
3. Remove the ignition coils. Refer to Ignition Coil Replacement .
4. Remove the engine harness clips (4) from the cover.
5. Reposition the engine wiring harness out of the way.



6. Remove the fuel feed line retainers (1, 2) from the engine brackets.



7. Remove the camshaft cover bolts.
8. Remove the camshaft cover.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the camshaft cover and bolts.

Tighten
Tighten the bolts to 10 N·m (89 lb in).




2. Install the feed line retainers (1, 2) to the engine brackets.



3. Install the ignition coils. Refer to Ignition Coil Replacement .
4. Position the engine wiring harness and install the clips (4) to the cover.
5. Connect the engine wiring harness electrical connectors (2, 3) to the intake and exhaust camshaft position actuator solenoid valves.
6. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

Camshaft Cover Replacement LE5

1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
3. Disconnect the intake (3) and exhaust (2) camshaft position actuator solenoid valve electrical connectors.



4. Remove the ignition coils. Refer to Ignition Coil Replacement .
5. Remove the engine harness clips (1, 2) from the cover.



6. Remove the fuel feed line retainers (1, 2) from the engine brackets.



7. Remove the camshaft cover bolts.
8. Remove the camshaft cover.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the camshaft cover and bolts.

Tighten
Tighten the bolts to 10 N·m (89 lb in).




2. Install the ignition coils. Refer to Ignition Coil Replacement .
3. Install the engine harness clips (1, 2) to the cover.



4. Install the feed line retainers (1, 2) to the engine brackets.



5. Connect the intake (2) and exhaust (2) camshaft position actuator solenoid valve electrical connectors.
6. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
7. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .