Caution: Refer to SIR Caution in the Preface section.

Preliminary Procedures

1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove front floor rear console. Refer to Front Floor Console Replacement .

1

Electronic Brake Control Vehicle Yaw Sensor Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
8 N·m (71 lb ft)

2

Electronic Brake Control Vehicle Yaw Sensor Assembly

Procedure

1. Remove the console bracket and bolts.
2. Position Wire Harness Assembly out of the way.
3. Disconnect any electrical connectors.
4. Transfer components as needed.