GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 VUE - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Vehicle Speed Sensor Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1878229 Size: SH
  2. Remove the vehicle speed sensor (VSS) electrical connector (1) from the VSS.
  3. Remove the VSS electrical harness retainer (2) from the VSS.

    4. Object Number: 1548949 Size: SH
  4. Remove the retaining stud and the VSS. Pull straight out in order to avoid damage to the case.

Installation Procedure
  1. Clean and dry the VSS.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1548949 Size: SH
  2. Install the VSS and the retaining stud.

    3. Tighten
    Tighten the stud to 12 N·m (97 lb in).


    Object Number: 1878229 Size: SH
  3. Install the VSS electrical harness retainer (2) to the VSS.
  4. Install the electrical connector (1) to the VSS.
  5. Lower the vehicle.