GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 VUE - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure
  1. Place the park brake lever in the released position.
  2. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
  3. Remove the front floor console. Refer to Front Floor Console Replacement.

    4. Object Number: 1876516 Size: SH
  4. Disconnect the park brake warning lamp switch electrical connector (1).

    5. Object Number: 1876521 Size: SH
  5. Remove the park brake warning lamp switch (1) by compressing the locking tabs.

Installation Procedure

    Object Number: 1876521 Size: SH
  1. Install the park brake warning lamp switch (1).

    2. Ensure the switch is properly positioned and the locking tabs are fully deployed.


    Object Number: 1876516 Size: SH
  2. Connect the park brake warning lamp switch electrical connector (1).
  3. Install the front floor console. Refer to Front Floor Console Replacement.
  4. Enable the SIR system. Refer to SIR Disabling and Enabling.