GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1889266  Size: SH
  1. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
  2. Disconnect the engine wiring harness electrical connector (3) from the bank 2 exhaust camshaft position (CMP) sensor (6).

  3. Object Number: 1285243  Size: SH
  4. Remove the CMP sensor bolt.
  5. Remove the CMP sensor.

Installation Procedure


    Object Number: 1285243  Size: SH
  1. Install the CMP sensor.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the CMP sensor bolt.
  4. Tighten
    Tighten the bolt to 10 N·m (89 lb in).


    Object Number: 1889266  Size: SH
  5. Connect the engine wiring harness electrical connector (3) to the bank 2 exhaust CMP sensor (6).
  6. Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .