The fuel pump control module (FPCM) controls and monitors the operation of the fuel system. When the FPCM detects a fault and sets a DTC, the FPCM sends a GMLAN serial data message to the engine control module (ECM) requesting the illumination of the malfunction indicator lamp (MIL). This DTC sets in the ECM when it receives a MIL request message from the FPCM.

The ignition is in crank, or the engine is running.

The FPCM detects a fuel system related fault and sets a DTC.

DTC P069E is a C type DTC.

DTC P069E is a C type DTC.

Using the Failure Records data may help locate an intermittent condition. If you cannot duplicate the DTC, the information in the Failure Records can help determine how many miles since the DTC set. The Fail Counter and Pass Counter can help determine how many ignition cycles that the diagnostic test reported a pass and/or a fail.

Schematic Reference

Engine Controls Schematics

Connector End View Reference

Component Connector End Views

Description and Operation

Fuel System Description

Electrical Information Reference

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions

Scan Tool Reference

Control Module References for scan tool information

Verify none of the following DTCs are set in the FPCM: