Preliminary Procedures

1. Remove the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement.
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.

1

Air Cleaner Assembly Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

2

Air Cleaner Assembly Bolt (Qty: 2)

Tighten
6 N·m (53 lb in)

3

Air Cleaner Assembly

Procedure

1. Disconnect any electrical connectors as needed.
2. Transfer any parts as needed.