For 1990-2009 cars only
- Inspect the drive sprocket support (43) for damage to the stator shaft splines, the journals, the bushings, and the roller bearing.
- Inspect the converter seal drain holes for blockage.
- Install the drive sprocket support (43) into the bell housing of the transmission case.
- Install the six drive sprocket support bolts (53) into the drive sprocket support (43).
- Hand start the bolts. Tighten the bolts to 12 N·m (9 lb ft).
Caution: Refer to Fastener Caution in the Preface section.
