GM Service Manual Online
For 1990-2009 cars only

Object Number: 2047322  Size: MF

Callout

Component Name

Preliminary Procedures

    • Inspect the support assembly for damage or wear to the splines, bushings, machined surfaces and threaded holes.
    • Inspect the transfer drive gear for damage or wear.
    • Inspect the transfer drive gear bearing assembly for proper operation.
    • The bearing should roll smoothly and quietly.

1

Pin

2

Generator/Drive Motor Position Sensor Stator Assembly

3

Drive Motor Generator Position Switch Sensor Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Tighten the bolts in sequence shown.

Tighten
15 N·m (11 lb ft)