GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 VUE - AWD 🢒 Transmission 🢒 Automatic Transmission - 2MT70 🢒 Variable Low and 1-2 Reverse Clutch Housing and Front Differential Transfer Drive Gear Assemble

Object Number: 2047317 Size: MF

Callout

Component Name

Preliminary Procedures

    • Inspect the support assembly for damage or wear to the splines, bushings, machined surfaces and threaded holes.
    • Inspect the transfer drive gear for damage or wear.
    • Inspect the transfer drive gear bearing assembly for proper operation.
    • The bearing should roll smoothly and quietly.

1

Variable Low and 1-2 Reverse Clutch Housing Fluid Passage Seal

2

Variable Low and 1-2 Reverse Clutch Housing (O-ring) Seal

3

Variable Low and 1-2 Reverse Clutch Housing Assembly

4

Variable Low and 1-2 Reverse Clutch Housing Bolt M6 x 40 mm (Qty: 7)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Rotate Center Support Clockwise against clutch housing splines befor torquing.
  2. Tighten the bolts in sequence shown.

Tighten
15 N·m (11 lb ft)