1

Drive Motor/Generator Stator Cooling Tube Retainer

2

Drive Motor/Generator Stator Cooling Tube Assembly (RHS)

3

Drive Motor/Generator Stator Cooling Tube Seal (Qty: 2)

4

Drive Motor/Generator Stator Assembly - Unit B

Tip
Insert electrical connector through pass through hole in case.

5

Drive Motor/Generator Power Inverter Module Cable Assembly Seal - 3 Phase

6

Drive Motor/Generator Power Inverter Module Cable Assembly - 3 Phase - B

7

Drive Motor/Generator Power Inverter Module Cable Bolt - External M6 x 20 mm (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

8

Drive Motor/Generator Power Inverter Module Cable Housing Cover Seal

9

Drive Motor/Generator Power Inverter Module Cable Connector Bolt M6 x 25 mm (Qty: 6) Internal

Tighten
9 N·m (80 lb in)

10

Drive Motor/Generator Stator Cooling Tube Seal (Qty: 2)

11

Drive Motor/Generator Stator Cooling Tube Assembly (LHS)

12

Drive Motor/Generator Stator Bolt M6 x 20 mm (Qty: 4)

Tighten
9 N·m (80 lb in)

13

Drive Motor/Generator Rotor Assembly - Unit B