1

Front Differential Drive Pinion Gear Roller Bearing Assembly

Caution: Failure to apply the lubricant will cause damage to the bolt and nut threads.

Procedure

1. Tighten DT-49230-1 until it fits snugly on the bearing.
2. Adjust so it sits on the torque dampener housing surface just beyond the bearing opening.
3. Apply the extreme pressure lubricant J 23444-A to the puller bolt threads to prevent damage to the bolt threads during bearing removal.
4. Hold the puller bridge bolt and turn the nut to remove the bearing.

Special Tools

For equivalent regional tools, refer to Special Tools.

2

Front Differential Drive Pinion Gear Lube Dam

Procedure

Slide axle seal puller downward to penetrate lube dam. Turn counter clockwise to engage threads, then pull with seal puller.

Special Tools

For equivalent regional tools, refer to Special Tools.