Preliminary Procedures

1. Drain the generator control module cooling system. Refer to Generator Control Module Cooling System Draining and Filling
2. Remove the air conditioning condenser. Refer to Air Conditioning Condenser Replacement
3. Remove the generator control module coolant pump hose - pump to radiator inlet. Refer to Generator Control Module Coolant Pump Hose Replacement - Pump to Radiator Inlet
4. Remove the generator control module coolant inlet hose. Refer to Generator Control Module Coolant Inlet Hose Replacement
5. If replacing radiator then transfer coolant temperature sensor. Refer to Coolant Temperature Sensor Replacement

1

Generator Control Module Coolant Radiator Bolts (Qty 2).

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Generator Control Module Coolant Radiator